home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19970104-19970326 / 000438_news@columbia.edu _Wed Mar 19 14:49:46 1997.msg < prev    next >
Internet Message Format  |  2020-01-01  |  3KB

  1. Return-Path: <news@columbia.edu>
  2. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
  3.     by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id OAA25449
  4.     for <kermit.misc@watsun.cc.columbia.edu>; Wed, 19 Mar 1997 14:49:42 -0500 (EST)
  5. Received: (from news@localhost)
  6.     by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id OAA18588
  7.     for kermit.misc@watsun; Wed, 19 Mar 1997 14:49:40 -0500 (EST)
  8. Path: news.columbia.edu!panix!news.mathworks.com!news.maxwell.syr.edu!EU.net!Germany.EU.net!wizard.pn.com!news.xensei.com!news.erg.sri.com!news.sri.com!anemone.csl.sri.com!argon.csl.sri.com!not-for-mail
  9. From: rushby@anemone.csl.sri.com (John Rushby)
  10. Newsgroups: comp.protocols.kermit.misc
  11. Subject: Problems with Tecra+DOS+kermit
  12. Date: 19 Mar 1997 11:13:57 -0800
  13. Organization: Computer Science Laboratory, SRI International
  14. Lines: 35
  15. Message-ID: <5gpdtl$718$1@argon.csl.sri.com>
  16. NNTP-Posting-Host: argon.csl.sri.com
  17. Xref: news.columbia.edu comp.protocols.kermit.misc:6770
  18.  
  19.  
  20. I have a Toshiba Tecra 740 booted to MSDOS via F8
  21. (I'm running DOS simply because Linux isn't installed yet).
  22.  
  23. There is an internal modem on COM2, standard address and IRQ, RTS flow control.
  24.  
  25. Kermit 3.14 is unable to use this modem with the speed set higher than 2400!
  26. I get the same problem with an external modem via COM1;
  27.  
  28. However, if I disable the internal modem (via tsetup) and use a
  29. Megahertz PCMCIA modem as COM2 (using the point enabler), it works fine.
  30.  
  31. I've tried other versions of Kermit on the internal modem with the
  32. following results:
  33.  
  34. 3.15: same problem as 3.14
  35. 3.13: doesn't even load--divide trap (does the same on my P6 desktop)
  36. 2.29: works perfectly!
  37.  
  38. The symptom at higher speeds with 3.14 is that ATH generates 0 and
  39. then everything locks up.  Dialing works but nothing appears on the
  40. screen.  "Show modem" reports everything as expected.  I know this
  41. sounds like the "can talk but cannot hear" problem described in
  42. kermit.bwr, but the address and IRQ are ok, there are no conflicts
  43. that I can see, and that wouldn't explain why 2.29 works, nor why 3.14
  44. works at slow speed and with a PCMCIA modem.
  45.  
  46. Any ideas?
  47.  
  48. ------------------------------------------------------------------------------
  49. John Rushby                  Email: Rushby@csl.sri.com
  50. Computer Science Laboratory  Tel: (415) 859-5456 [hit 0 to escape voice-mail]
  51. SRI International            Fax: (415) 859-2844
  52. 333 Ravenswood Avenue        WWW: http://www.csl.sri.com/~rushby
  53. Menlo Park, CA 94025, USA    ftp: ftp.csl.sri.com/pub/{reports|pvs}